13 needle nitrile red yarn black gloves

Product Introduction

The 13-needle Nitrile Red Yarn Black Glove is a professional-grade protective glove that combines durability and flexibility. It uses high-quality materials to ensure excellent cut, wear, and puncture resistance, while maintaining good flexibility and comfort. The design considers practical needs, such as reinforced fingertip protection and flexible joint structure, as well as an easy-to-wear design, suitable for various occasions like mechanical operation, maintenance work, and laboratory research.

Product Shipping Guide

Packaging Material Selection
Use double-layer corrugated boxes (thickness ≥5mm) with bubble wrap for 13 needle nitrile red yarn black gloves. Pack each pair in individual PE sealed bags. Nitrile material has high surface friction (coefficient 0.6-0.8), and black coating may rub against adjacent items during transit. Separate packaging prevents glove adhesion or red yarn snagging. Seal box edges with waterproof tape to block moisture absorption by yarn.

Temperature & Humidity Control
Maintain transport conditions at 5-30°C and 40-60% humidity. Nitrile layers in 13 needle nitrile red yarn black gloves may soften at high temperatures. Red yarn exceeding 3% moisture expansion risks seam splits. Place temperature/humidity loggers in containers. Avoid non-temperature-controlled air cargo. Pre-cool and dehumidify shipping containers 24 hours before loading.

Stacking & Weight Limits
Maximum 15kg per box of 13 needle nitrile red yarn black gloves. Stack height ≤1.5m. Nitrile coating withstands 12MPa pressure (ASTM D695), but prolonged compression may reduce palm thickness by 0.1-0.3mm. Use crisscross stacking with rigid separators between layers to prevent box deformation from glove elasticity.

Transport Method & Timeframe
Prioritize temperature-controlled ground transport within 72 hours. 13 needle nitrile red yarn black gloves stored over 5 days in sealed spaces may develop odors (<0.5ppm, compliant with GB/T 27630). For international shipping, use UV-blocking containers-red yarn colorfastness drops 1-2 grades after 200 hours of direct sunlight (AATCC 16).

Inspection & Issue Handling
Check 13 needle nitrile red yarn black gloves upon delivery: measure nitrile thickness (standard 0.8±0.05mm) with calipers, inspect red yarn for breaks under 10x magnification. For boxes with >2cm dents or >5cm² glove adhesion, halt unpacking. Photograph with scale references and submit quality reports within 72 hours for claims.

The specifications and dimensions of the 13 needle nitrile red yarn black gloves are as follows:

Palm length: 230-260 millimeters

Palm width: The width at the center of the palm is approximately between 80 ± 5 millimeters and 110 ± 5 millimeters, with specific dimensions depending on the glove model

Hot Tags: 13 needle nitrile red yarn black gloves, China 13 needle nitrile red yarn black gloves manufacturers, suppliers, factory, cleaning glove, pvc chemical gloves, pvc red coated gloves, 13g knit black yarn black nitrile safety gloves, polyurethane gloves, latex dipped work gloves